H2EXCEED

Frequently asked questions

Q. What kind of device is H2EXCEED?

A. [Hydrogen Inhalation] [Hydrogen Bath] [Hydrogen Drink]; H2EXCEED is a 3-in-1 dispenser that provides these 3 functions easily!

Q. How do I use it?

A. You can use it simply by attaching the included inhalation mask, bath attachment, and hydrogen drink diffuser according to your application. 

・[Hydrogen Inhalation] → You can directly take in fresh hydrogen by attaching the inhalation mask

・[Hydrogen Bath] → By connecting the bath attachment and placing the end of the tubes into the water, it will turn your bath into a Hydrogen Bath

・[Hydrogen Drink] → By attaching the diffuser to the tubes, you can diffuse your drinks – Water, Tea, Juice – with hydrogen, giving you some fresh hydrogen drinks!

Q. How long should I inhale hydrogen gas?

A. We recommend inhaling for about 30 minutes in MODE 2.

Q. How do I use the H2EXCEED for a bath?

A. In MODE 3, you can put the bath attachment in the bathtub and take a hydrogen bath in about 20 minutes.

Q. How much hydrogen is generated by the E2EXCEED?

A. H2EXCEED is able to generate a maximum hydrogen concentration level of approximately 30,000PPM.

Q. Is it necessary to replace the purified water? 

A. There is no need to replace the purified water. However, as the level of purified water decreases during usage, purified water can just be toped-up instead. When doing so, please add the purified water up to the MAX level each time. (*May differ slightly depending on the usage conditions. If you are particularly concerned, you can replace the purified water.)

Q. Do we need to replace the cartridge? 

A. There is no need to replace the cartridge.

HANDLING PRECAUTIONS

1. SAFETY PRECAUTIONS

  This H2EXCEED is a device that breaks apart purified water (or pure water) into hydrogen and oxygen in order to produce hydrogen gas for inhaling, bathing, and drinking.

  Please refrain from using it for purposes other than this purpose.

2. INSTALLATION

  Place the product in a location that satisfies the following conditions:

  ・ On a flat surface; Places where there is no danger of falling

  ・ Where there is a free space of 30 cm or more surrounding the device

  ・ Not within direct sunlight

  ・ Avoid using on carpeted area; Ample ventilation below the device is required to allow oxygen particles generated during electrolysis to escape

  Plug the power cord into an outlet.

3. WHEN USING FOR THE FIRST TIME

・ Do not turn on the power when the purified water tank is empty.

  Do not press any button when the purified water tank is empty.

・ Precautions for equipment warm-up

  Be sure to remove the black cover cap attached to the cap before warming up. If you warm up with it installed, the pressure inside the tank will increase, and the purified water may flow back and leak from the bottom of the device.

・ Precautions when replacing attachments

  Due to the pressure of the hydrogen gas, it may be difficult to disconnect the attachment. Do not apply too much force as this may cause the protruding cap to break. Instead, gently turn the cap to remove it and pull out the attachment.

・ Replenishment of purified water

  Never use anything other than purified water in the purified water tank. Using tap water, mineral water, well water, etc. will void the warranty.

4. MAINTENANCE

・ Purified water tank

  As purified water is used, the water tank will not get dirty easily. (As much as possible, do not wash the inside of the tank)

  Rinsing lightly with purified water is still possible. (However, do not use any cleaning tools or detergents)

5. AFTER-SALES SESRVICE

・ Before requesting repair

  If you suspect a malfunction, please contact the customer center.

  ※ Please refrain from modifying or repairing the product by anyone other than our designated repair person.

・ Warranty period

  One year from the date of purchase.

SPECIFICATIONS

SIZE/WEIGHT

MAIN BODY: W136 X D246 X H340 mm / 2,650G

MASK TUBE: 2m/80g

HYDROGEN WATER TUBE: 1m/36g

BATH TUBE: 5m/125g

WATER CATCHER: W70 x 94mm (when opened) / 28g

CUP LID: W108 x H27mm / 66g

DIFFUSER: 200mm / 6g

BATH ATTACHMENT: W36 x D47 x H41 mm / 66g


RATED VOLTAGE: AC100V~240V, 50/60 Hz

MAXIMUM POWER CONSUMPTION: 50W

WATER TANK CAPACITY:MIN 440ml ~ MAX 820ml

For further assistance, please contact:

Email: mailto: contact@bmirai.com

WhatsApp: +65 9462 9630

© 2023